Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


 All Forums
 Reso-Related Topics
 Building, Setup, and Repair
 ARCHIVED TOPIC: advice on repairing my reso ?


Please note this is an archived topic, so it is locked and unable to be replied to. You may, however, start a new topic and refer to this topic with a link: http://www.resohangout.com/archive/11244

wmcooper - Posted - 10/27/2009:  12:36:58


Hi I'm new here. I have an old metal body regal / dobro (pics later) it has the luged stamped cone. there is a small crack where the screw goes through the center of the cone. Should I replace the cone with a new spun one ? any opinions? I don't know if the crack effects the sound or not.

another question, the bridge is ofset a little from the center of the spider, which way should the bridge face? should it be forward of the screw hole on the neck side of the body or behind it on the tail side?

I need new strings too. What would you suggest for string size? I want to play it in open D.

one other question. would this have had a wood soundwell originally? I don't think so because the cone sits on a ledge which is part of the metal bidy.

Thanks for any info you can give me.

Mike




TronconesAmigo - Posted - 10/27/2009:  15:17:21


You might save Your Spider Bridge as it sounds unique , all I have seen have the screw hole in the middle !

Play the Melody , sweet is good

Dan Brooks - Posted - 10/27/2009:  16:04:52


Mike,
If you like the sound (no buzzes, etc.), and the crack still allows the screw to function, I'd leave it as is. A new spun cone will dramatically change the tone and volume.

Your spider bridge is compensated. Measure from the nut to the 12th fret. This msmt. should be equal to the distance from the 12th fret to the saddles. Spin your cone/spider assembly accordingly to make these msmts. equal.

Any normal reso set should work fine with a D tuning. i.e. .058" - .016".

If it is a metal body, the cone ledge was manufactured into the metal body. No soundwell.

Hope this helped. Take care.

Dan Brooks

Dan Brooks
B & B Resophonic Guitars
therarelyherd.com/documents/27...tion=show

wmcooper - Posted - 10/27/2009:  16:38:27


Thanks, appreciate the information. There is some buzzing, but sounds like it's coming from the tuners so I tightened a couple loose screws on the worm gears, and there was no padding under the tail piece so that could be rattling some too. I'll put a leather pad under that.

One other question, rough idea what it would be worth? Here's the picture of it, my icon picture. Not that I would ever sell it. This one's a keeper. Just curious


Edited by - wmcooper on 10/27/2009 16:44:20

Dan Brooks - Posted - 10/28/2009:  02:59:01


Mike,

I'd have to see more details to get a good idea of age. Is there a serial # on the headstock? Does the coverplate have the "Pat. Pend" number, and if so, which number? What sticker is on the peghead...Dobro or Regal? Are the peghead slots cut with a saw or a router? Take photos and post them if you can.


Dan Brooks
B & B Resophonic Guitars
therarelyherd.com/documents/27...tion=show

wmcooper - Posted - 10/28/2009:  06:31:06


Unfortunately it's not the original neck. The neck on it now is not slotted it has the dobro logo on the headstock. Its a roundneck. When I got it, I was told that it originally had a square neck and was a dobro, It has the roled 'fiddle' edges, It has the lugged cone I think it's called? with the platforms where the spider sits. The spider has a one piece bridge with the screw hole either in front or behind. I'll have to figure out which way it goes. Hven't noticed a pat number on the cover, I'll have to look for that. hadn't occured to me. With a google search I found something that looked just like it except for the cover plate was painted where mine is chrome. That one was a dobro / regal and it said the metal body fiddle edge was made between 1935 & 1940. Well that's all I know about it. Well I'm going to keep it and play deltal blues on it. :) All I need is a set of good new strings.

Just took a look at your website, Those are some nice ones ! I tried playing a wood dobro in a local music ship and it just sounded like an ordinary guitar, didn't have that delta sound like my old metal body.


Edited by - wmcooper on 10/28/2009 06:33:33

Dan Brooks - Posted - 10/28/2009:  13:48:46


Mike,

It appears there have been several part changes to your reso down throught the years...but my research would indicate it is a Dobro Model M-35. They were in production from 1937 to 1940. Here is a blurb with a little info I found:

"No.35 or M-35
Sheet metal steel body, walnut sunburst (yellow or orange fades to brown) painted finish, usually segmented "f" holes (but sometimes round window soundholes), dot fingerboard inlays, bound rosewood fingerboard (sometimes unbound), 14 frets clear of the body, painted resonator plate, gold sparkle peghead overlay with "Dobro" peghead decal. Retail price of $35, a slightly fancier and expensive version of the M-32. The second most common model, appeared in catalogs in 1938 (but may have been available a year earlier), and hence should always have a pickguard (or at least two holes in the body where a pickguard was mounted). Discontinued in 1940."

Hopefully this is a bit more info than you had before. Take care and keep whangin' dem blues.

Dan Brooks
B & B Resophonic Guitars
therarelyherd.com/documents/27...tion=show

wmcooper - Posted - 10/28/2009:  13:56:58


sounds like it. Hard to see in the picture but the F holes are segmented. I wish it was all original but this one has been used a lot over the years obviously. Still it's good one for me !
Thanks !


Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Reso Hangout. All Rights Reserved.





Hangout Network Help

View All Topics  |  View Categories

9.667969E-02