|
Please note this is an archived topic, so it is locked and unable to be replied to. You may, however, start a new topic and refer to this topic with a link: http://www.resohangout.com/archive/58836
resojim - Posted - 03/06/2024: 09:38:48
Hello
I have a Fishman Nashville saddle pickup installed on my 1937 square neck Dobro brand resonator. I play seated and go into a JD Aura . The Aura is too far away for quick volume adjustment.. Sitting closer puts me in the mic stands. The last few gigs I incorporated a plug and play device for easier volume control . From this device I go into the JD Aura and on to the mixer. Now, with this device, i have onboard volume control at the guitar. This device uses a CR2032 button battery. I leave the device plugged into the 1/4" out of the resonator and, when not in use, always unplug the instrument cable from the device. .I suspect the instrument cable, plugged in, puts a load on the devices battery. The device has EQ but I leave these out of the signal.
"It's not love but it's not bad" apologies' to Merle Haggard
Brand: Keenso
See attached and see below
It is advertised as a "Pickup Power Amplifier High Bass Volume Control Impedance Matching for Acoustic Guitar"
