Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


 All Forums
 Reso-Related Topics
 Building, Setup, and Repair
 ARCHIVED TOPIC: Resonator parts for first build?


Please note this is an archived topic, so it is locked and unable to be replied to. You may, however, start a new topic and refer to this topic with a link: http://www.resohangout.com/archive/60259

ClayS - Posted - 08/09/2025:  18:29:23


Hi Everyone,

Newb here interested in building a single cone spider bridge wood bodied resonator. In looking for parts I seem to have found the high end (Beard, National) and the low end (Amazon/eBay) but nothing in between – is there a happy medium somewhere or are the Chinese parts on Amazon/eBay decent enough quality for a first build, equivalent to what is in imported resonator guitars? Thanks for any advice/thoughts -

C

hlpdobro - Posted - 08/09/2025:  18:57:48


My suggestion is to source the critical internal components (nut, insert, cone, spider) from a domestic maker. Cosmetics & Misc (tail, tuners, coverplate, screens) from whatever source your wallet will tolerate.

h

ClayS - Posted - 08/10/2025:  06:19:37


I was starting to wonder if that would work, appreciate the info - thanks!

MarkinSonoma - Posted - 08/10/2025:  10:58:10


Howard nailed it. 



The key components he mentioned are why some dobro players buy a relatively inexpensive guitar and at some point choose to "hot rod" it with top of the line components.



Though impossible to quantify in actual numbers, we've heard from reso luthiers over the years that the cone alone is responsible for 50% or more of the sound of a dobro. Some might say as high as 75% is in the cone.



Much more so than a flattop acoustic guitar, over the years I've thought of the spider bridge reso as sort of half guitar/half mechanical device. 



 



 



 


Edited by - MarkinSonoma on 08/10/2025 10:59:15

JC Dobro - Posted - 08/11/2025:  07:53:07


Yes agree w/ Howard and Mark.



One thought if you’re on a budget: Lots of players have installed fishman pickups, roller nuts, locking tuners, DoubleShot tailpieces, plus cone swaps, etc. on premium brand resonators. As such there are likely premium stock components sitting idle in various players’ storage bins and drawers.



There is a “want to buy” section in classifieds, so possible you could source some of these at a discount, rather than paying full retail and/or going the cheap import route.



Also, I can vouch for the Beard import cover plate, which is less than 50% the cost of their domestic coverplates. It’s sturdy and has a removable palm rest if that’s appealing.



Good luck on your build!


Edited by - JC Dobro on 08/11/2025 08:01:37

ClayS - Posted - 08/12/2025:  10:38:07


Thanks for the additional advice. Still researching but have seen/listened to enough to have at least decided to go with a Beard cone. I’ll post in the wanted section for orphaned components; that’s a good idea.

The research on these is really fun, the history and variations are fascinating and still evolving it seems. I went down the “Cathedranola” rabbit hole last night, still scratching my head on that one!

Zach Hoyt - Posted - 08/13/2025:  15:01:07


I have always used Beard #14 spiders and Beard cones, and have sourced everything else wherever is cheapest, as Howard suggested. I bought one set of inserts but have made my own since then, and have always made the nut, since I have lots of Corian around for making banjo nuts.

daver - Posted - 08/17/2025:  09:53:38


quote:

Originally posted by ClayS

Thanks for the additional advice. Still researching but have seen/listened to enough to have at least decided to go with a Beard cone...






A quality cone needs to be paired with a quality American produced spider.  The import spiders with either be too flimsy or too heavy, negatively affecting tone.  The cone and spider combination is the engine for your new reso, make that count.


Edited by - daver on 08/17/2025 10:00:03

daver - Posted - 08/17/2025:  09:57:20


quote:

Originally posted by Zach Hoyt

...and have always made the nut, since I have lots of Corian around for making banjo nuts.






Corian makes a fine nut in my experience.  An unsung material. Used to be that big box stores provided free sample blanks of Corian countertop material, and some were close enough to off white that they didn't look out of place.  I made a fine nut out it for a project reso.  The remaining chunk is "somewhere" ...


Edited by - daver on 08/17/2025 09:58:46

Zach Hoyt - Posted - 08/17/2025:  10:13:41


I learned about Corian from reading Roger Siminoff's Ultimate Bluegrass Mandolin Construction Manual back in 2008 or 2009, where he said it was as good as bone for mandolin nuts. I use black the most on banjos, but for guitars of any kind bone color seems to me to look better. I get it on eBay and it is a lot cheaper than bone on a per blank basis.

tomkatb - Posted - 08/17/2025:  10:53:41


Ditto Mark and Howard.

Years ago I was at Frank Harlows piking up a Black lightning he had hot rodded for me. I wanted a smaller guitar that I would travel with in less than ideal conditions.

I had two Physics teachers with me. Bright ladies.

We were talking about sound transmission. Frank had a Beard #14 and the cone out of my Regal black lightning.

He suspended the two spyders from a wire and stuck them with a little hammer.

The difference in tone was amazing when struck. Same with cones.

little ray - Posted - 08/17/2025:  12:33:06


The Beard Legend Cone is the most articulate cone I’ve ever put in a dobro.

Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Reso Hangout. All Rights Reserved.





Hangout Network Help

View All Topics  |  View Categories

8.203125E-02